OrangeMitten's Choose the Outfit You Want To Pose the Rig In from -A-'s ClipTools Blog

Choose the Outfit You Want To Pose the Rig In

First and foremost, I did NOT write this tutorial. I take NO CREDIT for this. If the author/host of the original tutorial requests I take it down, I will do so gladly.


You can find the original tutorial HERE. All I'm doing is adding the pics that are missing from the other site. These are not the original pics, these are MY photos of the individual steps from my copy and set up of Blender.


I skipped the first part about cloning your CAS item from s3oc, because there are other pics on that site the describes and shows how to do that. So do that before you begin with this set.




Changing the Rig’s Clothing
In the Outliner over on the right hand side find the line that has
the rig in it.  For the female rig this line will say afRig.
Click the + next to it to expand it.

Right click on the part that you want to replace and select Delete
from the Outliner Object Operation dropdown menu which appears.

You will notice that part of the mesh disappears from the 3D view window leaving only the rig (bones & joints) behind.

The Scene tab should be selected by default when you import the rig.  If it is not you will need to click it.

The S3PY Rig Tools should be expanded by default but if they aren’t
click the black triangle next to the title to expand that area.
Scroll down if you cannot see this area or if you cannot see the Load
CAS button in this area.   Click the Load CAS button.

Navigate to where you saved the clothing item.  Click on the
item and then click the Import Sims 3 Prop in the upper right hand
corner.  Remember to remove both top and bottom garments from the
rig before opening your item if you’re planning on loading a 1 piece
garment.
You will see your new clothing item(s) appear on the rig in the 3d
view and you are ready to create your pose or animation.  Note that
some changes of clothing may cause the hands and other exposed skin to
turn white or black.  This will not affect your pose or animation
but if you would like to fix it so it shows skin texture there continue
to the next steps.  If you choose instead to begin making your pose
right away select a joint on the rig and switch to Pose mode first.

Click the Texture button on the right hand side.  It looks like a
red and white checkered box.  A new box will open below.
Scroll down to the first empty line and right click on it.

After you click on the empty line it will turn blue and a bar that
says New will show up below.  Click the checkered box next to the
bar.  Do not click where it says New click the checkered box.
     ~Sunny's note- I did NOT have to right click the empty line. Clicking it with the left mouse button worked. Right clicking it did nothing.

A menu will pop up.  Select afBody_m.

The empty line you selected will now show the afBody_m.  Use the
up arrow on the right to move it above the Multiplier for your garment.

In the Outliner box above you will notice two lines that start with
afBody.  One is selected and this is the one you have added the
skin texture to.  Click the other to select it so that it turns
white.  Again click the first empty line and when the bar that says
New in it shows up click the checkered box next to it.  Select
afBody_m from the menu.

Move afBody_m above the Multiplier as before and you will see you now have skin showing on the appropriate parts of your rig.

The skin will not be completely correct yet so scroll down to the Mapping section and change Generated to UV:
     ~Sunny's note- do this for both of the afBody rig files you changed.

If you’re in Object mode after adding the clothes and skin texture
just click a joint on the rig and switch back over to Pose mode to begin
creating your pose.

     ~Sunny's final note-Be sure to select the Scene tab again to be able to use your Clip Tools!
-------------------------------------------------------------------------------------------------------------------------


Personal notes from Sunny- Hair works the same way as CAS items. But! in my testing I was only able to get hair to work if it had been cloned using S3oc. I couldn't get a, oh let's say a PeggyZone (FOR EXAMPLE only) hair to show up on my rig. This is in my testing only. It might work for you.
Another note- depending on the outfit you have imported there may only be One afbody_m (or ambody_m, or whatever depending on your rig) to add the skin texture to. It's quite alright if you don't have two.

Quick Hands in Blender, OR What Clear Transform Location means

Today, I'm going to show you my quick cheaty way to do hands when hands aren't the focal point of the pose. I'm also going to show you how you can rotate a pose so that the joint is dislocated, and how to put that joint back in place without losing the rotation- aka: Clear Transform-Location.

We're going to start off with Harriet as our rig of choice, and to begin we will make her left hand into a quick fist.

For starters, select ALL the base knuckle joints on the Left hand. Then hit R, and type in 70 on the keypad and then hit enter.

See how the back of the hand gets all lumpy? We're going to fix that by hitting Alt+G. I'll get into WHY we do that in a moment.

Next, you will select all the middle knuckles on the hand and hit R on the keyboard, and then type in 90 on the keypad and then enter.

From the side (view 3 on the keypad) you can see the fingers are rotating slightly to the front of our Rig (The pointer finger shows it best.) So I want to rotate those fingers straight. This is always just a guessed number. Just do it until you feel they are straight.

Here's a very over rotated edition of that rotation. Notice the pinky is much longer, the pointer much shorter. That's because in this over rotation you've 'dislocated' the joint. You've stretched the bone. And that's something we don't want because it looks awful and painful in game. Hitting Alt+G keeps the rotation, but it puts the joints back into position.

After hitting Alt+G you'll see how nice your fingers look. There is no sideways bending and everything is properly rotated.

To finish the Quick Fist, select all the final knuckles and rotate them by 90*. Now you just need to adjust the thumb to your liking, and make minor tweaks to the hand, wrist, and individual fingers to make sure your fist looks like a fist.

Now, We'll do a Quick Relaxed Hand

We'll do this on the rig's right hand. Again, begin by selecting all the base knuckles.

Then you'll hit R on your keyboard, and then type in -15 on the keypad and then hit enter. (We're doing a negative value on the right hand. We would use a positive value on the left hand.)

This time we're going to go to the Pose Menu at the bottom of our screen.

You'll see the words Clear Transform as a submenu, go ahead and select this menu.

Now we see the word Location (With Alt G next to it. That's your hotkeys to do it without the menu.) Go ahead and select it to get the joints back in proper position.

You'll see the first knuckles look less lined up, and more spread out. That's perfect.

Now select all the middle knuckles.

For the Middle Knuckles you'll hit R on your keyboard, and then type in -10 on the keypad and then hit enter. Then, either using the menu, or by hitting Alt+G clear the location of the joints.

Finally, select the end most knuckles and repeat the same steps as you did for the middle knuckles (R, -10, Enter, Alt+G or menu Clear Transform-Location.)

Now, you still need to tweak individual fingers, and you'll still need to pose the thumb, but this will quickly get you to a point where it's a lot easier to finish your hands. Make sure you do this very early on in posing, or else using the straight on angles (x, y or z hit twice so the axes will align with the joint in it's current position,) or you'll get some really wonky results. This is just a way to get your hands in a roughly acceptable manner quickly without fiddling around and posing each individual joint on the hands. These hands are NOT beautiful. They are quick.

Also- in the Clear Transform submenu you will have noticed the word All. This option will completely reset the selected joint(s) back to the original position. Very handy when you think you've boogered up only a few joints, but the rest looks fine.